Genuine OEM Husqvarna Parts - V-Belt 532130969

I was mowing last week abd my 54” deck Husqvarna suddenly quit moving. Engine still running, blades spinning, but would not move. If I stopped for a minute it would love again for a while. I was hoping it was the drive belt and not something more serious. Ordered this belt, got it overnight. Perfect length. Relatively easy swap- remove the deck, unbolt the rod from the PTO, unclip the PTO harness, work the belt off the muddle pulleys then the front pulley and then the rear pulley (watch the fan blades). Pull the belt over the PTO, pull it out and reverse for the new belt. Fit perfect and the mower is running great again. Will update in a few months to let you know how it’s holding up. Read more

This was a perfect fit for my Husqvarna LGT2654 to replace the drive belt. Again, for this tractor, this is the DRIVE belt and NOT the mower belt. Install was pretty fast and straightforward. If you set the parking brake on the tractor to release the tension from the belt you can swap it with plenty of slack. I did it with the mower deck removed to make access easier. The original belt lasted 18 years so I am hoping this replacement will last just as long. Read more

I ordered the new belt because I was having trouble with getting the mower to move forward or backwards. It would start to go as I pushed down then nothing, so I had to play with the throttle to get it rolling. It worked like this in both directions, forward and reverse. The longer I ran the mower the worse it got. I knew the problem had to be one of three things, the drive belt slipping, a weak belt tensioner spring, or the transaxle itself. Since the transaxle showed no signs of leaks, I decided to try a new belt first. The drive belt looked good from what I could see of it, no cracks or chunks missing. Still the belt was the easiest to change. The new belt (PN: 532130969) came in OEM packaging and arrived within two days from the time I ordered it. I compared the original belt to the new belt and didn't see much of a difference except the original belt surface was smoother and polished where it rode against the various pullies. At this point I wasn't sure the new belt would fix the problem but decided to change it anyway. To make it easier and safer to replace the belt, I removed the fuel from tank, and then laid the tractor over on it left side. Next I followed the instructions in the operator's manual. The entire process took around 30 minutes. Once the mower was on all four wheels again I put a little fuel in it, started it up, drove it around the yard. The belt did fix the problem. The mower drives like it did on day one. I'm glad I bought this belt for my Husqvarna YTH24K48 mower. It came as advertised. Read more

Fit my husqvarna great. Read more

Absolutely a great convenience and quality product for my riding lawnmower! Ease of installation was spot on! Read more

Ma Read more

I was getting frustrated. Specs call for 104 inch belt, after a while it kept falling off the pulley. This happens to you? 1st check / replace blade brake - as it wears slack is introduced to belt. Regardless my belt often came off. I bought this a 103 inch belt = solved the problem!!! Works great, even after cutting 6 inch tall grass (which heats up belt, causing stretching). Read more

I’m a retired mechanic. You can get a generic belt for a little less but paying a bit more for the manufacturer part will save you heartache and doing the repairs again later when the cheap part fails. Pay me now or pay me again later. Read more