High Quality, Sturdy (for light use), and EASY to assemble! Best use of limited storage space!
These shelves saved my cluttered closet! I can't believe how easy this was to put together, and how high-quality it is! I have very low strength and energy, but was able to put it together myself with very little effort -- and sometimes making my bed makes me winded, so that's saying something. I didn't have to use the rubber mallet at all. Everything fit together perfectly and easily. Tips: 1. Start by putting the "floor feet pieces" on all four corners of one square 2. Slide the next square into the sides of the floor pieces, until you have as much of a base as you have room for 3. Each time after connecting a panel onto the side and putting the connectors on the outside of it, reach to put your hand on each of the back outer pieces, and push them together, so that the panels will "click" further into the connectors. Then do the same for the front. Be gentle and mindful of your angles, but firm. (Remember, I'm really weak, so it won't take much pressure.) 4. Slide the vertical panels down onto the connectors. Only put the next layer of connectors onto the back corners of them first, and push down on the top of them like you pushed on the sides. so they'll "click". 5. With the front more "open", it's easier to slide the next layer panel into the back connectors and front side, clicking them in as much as you can. Then you can put that next corner connector onto it, and "pressure" it towards the other front connector you slid the panel into, to get that extra "click". 6. As you finish each layer, do an extra "push" from the two sides to help make sure all that level is "clicked" as much as it will. Since I was putting this up against a closet wall and didn't need to put the back panels in, I decided to see how far I could stretch the materials. there were more than enough parts to make the 3x3 grid that I purchased it for. I had enough pieces to do a 4x3 with a 13th square on the top right, except there was just one central connector short for this plan. So I took a velcro "cord tie" and secured just one of the top-front panels and it works great. These drawers are just 11 x 11 cloth cubes and fit perfectly. I will be hanging shorter things up above, and still have room left over. Highly recommended! Read more





























