Polycarbonate Clear Plastic Sheet 12 X 18 X 0 0625 1 16 Exact EasyRuler Film Shatter Resistant Easier

This is easy to cut with a box cutter as long as you keep it on a solid flat surface. If there is even a little tension while cutting, it can crack or break in the wrong direction even when both sides are scored in a straight line. The thickness is perfect because it cuts cleanly without the need for bigger tools and it works great as a DIY aquarium lid. Read more

I used small this Polycarbonate Clear Plastic Sheet on the wall under our kitchen counter. The garbage can lives there and is moved from time to time and is always scraping the paint under there. My wife does not like that, surprised? This sheet drilled easily with no cracking or marring (it has a plastic wrapper). I put anchors in the wall an mounted it. It has stopped the problem and the wife is happy with it, I even got "that's pretty smart" from her. I almost complained about this sheet because after screwing it to the wall it looked cracked around the screw holes. Sheet cracked with slight pressure of screws???? But after further review I found I had tapped the anchors with a small hammer when installing them in wall and had damaged the drywall slightly. This sheet was as clear and pristine as when I first looked at it. Good stuff! Poor install! Read more

After cutting it to size---it is perfect! Read more

Easy to cut to the size you need. Durable but easily scratched. Read more

I recently crafted a diy fish tank lid using this sheet, and I couldn’t be happier with the results. The sheet is thick enough to feel sturdy, giving me reassurance my betta is safe and secure in his tank. At the same time. It’s thin enough to be cut with snips, making it easy to customize to fit your tanks needs. My tank has odd measurements compared to average 10 gallons tanks so I couldn’t find a lid that would perfectly fit my tank. It was easy to round the corners to allow space for cords to go through as well. I love that this lid offers the best of both worlds. It ensures that my betta stays safe, preventing any accidental jumps, yet doesn’t sacrifice any style. I wanted to keep the seamless style since I have a rimless tank. Being clear and thin, it doesn’t obstruct any views and allows me to do that. To add on some convenience, I also ordered some clear self-adhesive hinges to create an opening for feeding. This lid has proven to be a practical and stylish addition to my aquarium setup, and I highly recommend it to fellow fish keeps. It’s a cost-effective and customizable solution for keeping your aquatic friends safe and your tank looking great! Read more

Purchased on the recommendation of my watercolor teacher. Fits quarter sheets of Arches paper with margins for the painters tape. I’m happy with this for the purpose mentioned. Read more

A+ Read more

If you intend to use this as a flat surface, it should work ok. I tried to glue and clamp it on a Chevy instrument panel cluster which is not flat and it kept snapping off even after clamping for 48 hours. The old broken cover I took off and was trying to replace with this acrylic piece was about 1/2 the thickness of this 1/16" thick piece, so just wished I could find a 1/32" thick product. Or like my headline states, I wish it was more pliable. I finally used a slow setting epoxy which did run on the inside of the acrylic piece, but when I left it clamped for 4 days, just to make sure the epoxy had cured, it did hold this acrylic piece in a curved positon. Not a perfect job, since I had epoxy that ran and several scratch marks from trying to clamp several times. Basically, it just was not thin enough or pliable enough for my project. It will probably work fine for any project that requires a flat acrylic piece. Not permanently curved. Read more