Seachem

Seachem PhosGuard 100 mL bagged - 67101850

$4.89

1760+ bought in the past month

About this item

  • Rapidly Removes Phosphate And Silicate From Marine And Freshwater Aquaria
  • Highly Porous For High Capacity And Bead Shaped For Optimum Water Flow
  • Outperforms all competing products
  • Not Recommended For Phosphate Based Buffers In Freshwater Aquaria
  • 100 milliliters treats 60 US gallons
$4.89

In Stock

Easy Returns · Return eligibility shown before checkout


How you'll get this item

DeliveryShipping details confirmed at checkout

Fulfillment

Ships fromVentari
Returns
Easy ReturnsReturn eligibility shown before checkout
PaymentsPayment details confirmed at checkout

Currently unavailable
Easy Returns · 30-day window
Product details
BrandSeachem
Liquid Volume100 Milliliters
Item Weight2.4 Ounces
Item FormLiquid
ManufacturerSeachem Laboratories, Inc.
Technical specifications
item_weight2.4 Ounces
departmentUnisex-Adult
manufacturerSeachem Laboratories, Inc.
item_model_number185
date_first_availableOctober 30, 2005
item_package_dimensions_l_x_w_x_h6.5 x 5.2 x 1.69 inches
item_dimensions_lxwxh1.25 x 4.69 x 5 inches
brand_nameSeachem
target_audience_keywordfish
directionsMay generate heat on initial contact with water. Pre-wet by adding to a double volume of freshwater, followed by a rinse. For best results, PhosGuard™ should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Use of a filter bag is recommended. Use 85 mL (1/3 cup) for every 200 L (50 US gallons) saltwater or 400 L (100 US gallons) freshwater. Leave product in place for 4 days, then test phosphate or silicate concentrations with either MultiTest™ Phosphate or MultiTest™ Silicate. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosGuard™, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Over treating is not recommended. PhosGuard™ is not an exchange resin and does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities.
country_of_originUnited States
warranty_descriptionWarranty
model_nameSeachem PhosGuard, 100 mL bagged - 67101850
colorNo Color
size100 ml Bagged
materialPlastic
age_range_descriptionall stages
number_of_items1
included_componentsSeachem PhosGuard, 100 mL bagged - 67101850
specific_uses_for_productAquarium Filtration
is_discontinued_by_manufacturerNo
product_dimensions1.25 x 4.69 x 5 inches; 2.4 ounces
manufacturer_recommended_age1 month and up
best_sellers_rank#8,098 in Pet Supplies ( See Top 100 in Pet Supplies ) #57 in Aquarium Water Treatments

From the brand

Product detailProduct detail

Product videos

Product video 1

Customer reviews

4.61,965 ratings
  1. 588%
  2. 413%
  3. 30%
  4. 20%
  5. 10%

Customers say

Customers find this water treatment effective at removing algae and reducing phosphate levels, while keeping water crystal clear.

★★★★★

Effective and Reliable Phosphate Remover for Aquariums

Tino BrunoFebruary 17, 2025✓ Verified purchase

I’m absolutely thrilled with Seachem PhosGuard and here’s why I’m giving it a 5-star review: 1. Excellent at Removing Phosphates: I’ve been dealing with high phosphate levels in my aquarium for a while, and Seachem PhosGuard has been a game-changer. After using it for just a few days, I noticed a significant reduction in algae growth, which was one of my main concerns. The product works efficiently at removing phosphates, improving water clarity, and maintaining the overall health of my tank. 2. Easy to Use: The 100 mL bag is convenient and easy to place in the filter. It’s designed to be used in a filter bag, which makes it super simple to add to your system. I also appreciate that it’s not messy and doesn’t leave any residue in the tank once it’s in place. 3. Safe for Aquatic Life: I love that Seachem PhosGuard is safe for my fish and plants. I’ve had no negative effects on the aquatic life in my tank after using it, which is a huge relief. It’s one of the reasons I trust Seachem products—they’ve always proven to be gentle on sensitive ecosystems. 4. Fast-Acting Results: The results were quick! My water cleared up in just a few days after starting to use it. You can see the improvement in the clarity of the water and a reduction in algae build-up. If you have any phosphate-related issues in your tank, this product will definitely help. 5. Long-Lasting: While the bag is small, it goes a long way! The 100 mL lasts quite a while, and you can reuse it for multiple cycles. This makes it a cost-effective solution for keeping phosphate levels in check. 6. Great for Freshwater and Saltwater Tanks: I’ve used this in both my freshwater and saltwater aquariums with great success. Whether you’re managing a fish-only tank or a reef tank, this product works across the board. 7. Reliable Brand: Seachem is a brand I’ve trusted for years, and this product lived up to the high standards I’ve come to expect from them. Their products are always effective and reliable, and PhosGuard is no exception. Final Thoughts: If you’re battling high phosphate levels in your aquarium, Seachem PhosGuard is a must-have. It’s effective, easy to use, and safe for both fish and plants. The results are noticeable quickly, and I’ll definitely be keeping this product stocked in my aquarium maintenance supplies! 🌟 Highly recommend for anyone needing to reduce phosphates and improve water quality in their tank! Read more

Review image 1
★★★★★

Helped reduce algae in my tank

RebeccaFebruary 13, 2026✓ Verified purchase

Been using this for a while and it has helped with the algae in my tank. While it comes already bagged for use in larger aquariums, I have a 20 gal and use it in smaller mesh bags in my HOB filter. I can't say enough how much the SeaChem products have improved my tank quality! Love my healthy tank and fish! Read more

★★★★★

It is Very effective

BMGFebruary 9, 2026✓ Verified purchase

I started with 10ppm of phosphate in my 40 gallon tank. The first packet became saturated in about 4 days. I am on my second packet, and my reading is between 1ppm, and 0.5ppm. This was my target. I'll leave the packet in for a few more days and then replace it with Fluval ClearCarb to maintain my desired level. Read more

★★★★★

Perfect

Steven Patske JrMarch 7, 2026✓ Verified purchase

Works good! Read more

★★★★☆

Great filter media but make sure it has good water flow over it

James Z.December 20, 2014✓ Verified purchase

This product works as described, and I recommend it to others. I was having a phosphates problem for a while in my salt water tank at work because some of my macro algae had broken down in a spot I couldn't reach and was decaying there. I also, unbeknownst to me for a while, had an reverse osmosis/de-ionization filter system that wasn't pulling all the phosphates out of my top-off water. Bottom line, I was able to get the problem in better control using PhosGuard. That's good because the excess phosphates were really feeding some hair algae that had sprung up in my tank. The one thing that you have to note about this product is that it really needs to be in a place where it gets good water circulation over the media. I haven't had much luck in applications where there isn't much flow going directly over the PhosGuard. Additionally, depending on the prices at the time of purchase, you may be able to save money by buying a bag for the PhosGuard and buying the larger quantities of PhosGuard. Once when I did the math, it was about the same price to just keep buying these 100 mL bags, but the next time I needed some it was cheaper to buy the bag and the larger bottle of PhosGuard. Apparently the price of these fluctuate a bit. Other than that, I recommend this to others trying to keep phosphates under control. Read more

★★★★★

No more brown diatom algae

Dylan PettitMarch 9, 2026✓ Verified purchase

Got this to help with brown diatomaceous algae I cant seem to get rid of. I opted to not buy the expensive silicate test kit and just try one of these since they're literally $5 and lo and behold my problem is fading away. Thank gosh man. Def glad I found this product! Seachem is 10/10 brand all around imo Read more

★★★★★

I can see again!!!!

Rochelle KieferJanuary 28, 2026✓ Verified purchase

I just had shoulder surgery in December. I was still changing the water out every 2-3 days because my algea blooms were so bad and I couldn't see through my 36 gallon aquarium. I tried the algae light too I don't recommend! . After talking with Alexa AI for a while he recommended Phosguard. I'm on my 6th day today! I bought the test kit and 4 bags. I followed the directions and changed out the bag on the fourth day. The 5th day was better and I think tomorrow it will be totally normal! Best buy ever! Needless to say my shoulder is still jacked up but I'm so happy not to be hauling water anymore! Read more

Review image 1Review image 2
★★★★★

Good stuff!

robert mirandaFebruary 26, 2026✓ Verified purchase

The media could not be loaded. I love this stuff, I use it once a month in my 55 gallon. Read more

Recently Viewed

We use optional analytics cookies to understand how visitors use Ventari and improve the experience. This banner controls analytics measurement only. See our Cookie Policy.