Super PDR Dent Puller Kit Car Dent Removal Kit with Bridge Puller Small Dent Puller for Auto Dent

If you have an expensive car or a complex dent and you want it to look perfect. Hire a PDR professional, it is definitely an acquired skill. If you are like me and have an older car but still want it to look nice and enjoy DIY projects this is a outstanding kit. It has everything you need with the exception of a battery for the light which the seller points out. I pulled multiple small dents from door and quarter panel from a black car. They were removed over 80%, so you would not notice them unless I pointed them out to you while looking at the correct angle. Which was totally acceptable for me. The key is to make sure to clean and remove any wax/coatings/dirt from the paint, before applying the glue. It going to take many pulls to step by step reshape the metal outwards. Be patient, pay attention to the amount of flex of the actual sheet metal. Different areas (middle of a door lots of flex) and wheel well (very little flex) will require different techniques and strengths. I used a combo of the slide hammer and slow puller depending on application. The small body hammer was excellent as well, nothing fancy but got the job done. The different size and shape pull tabs were extremely helpful. I didn't use the provided glue gun, I used my cordless one instead. I was quoted $450 to pull all the dents from my car. If it was a newer and very nice car, I might have done that. But it wasn't worth to me on my older car. For the $70 on this kit, I am happy with the results. Also, can use it on other potential cars in the future. Just keep in mind, go slow its going to take several pulls and tapping. But the patience will pay off. Don't expect perfection especially on a dark car. Overall a great kit DIY kit. Read more

Some awesome tools, I bought some extra glue because the ones that come in this kit are... not the best. At first I couldn't get it because of the glue kept coming off, but then when I used my separate glue, it started working. This kit doesn't come with good instructions. So if you're new like me watch a video, let the glue cool down for a long while, in my case I had to wait about 45 minutes in the heat and 15 minutes when it was cooler. Also you have to wait until the glue gun heats up otherwise it won't adhere. You can see from my picture that the bridge dent puller uses plastic and it broke. I was almost done with my repair too, I think I'm going to have to return the kit. I was very happy when it started pulling out my dent, but very disappointed when it broke. Update they sent me a replacement puller with metal parts. Read more

The kit was good but didn’t completely take any dents out. It definitely helped and it’s a great alternative instead of going and getting your car forced but it may not permanently remove your dent (depends how bad it is). Good value and it was pretty easy to use. Read more

The kit came with everything pictured and the glue gun works with the sticks.. but it didn't pull out my fridge dent at all. -_- Made in China Read more

With only 200 miles on the odometer of a new car, some careless person did a double-tap on a rear door with their grocery cart. Two small dings and scratched paint. A shop gave an estimate of almost $1,500 and about a week to get repairs done. I already had 2 open claims related to a house fire so intended to pay cash for the door dings. But I thought, what if I pay to fix the door and then weeks later the car is damaged again? So, I ordered this tool to see what I could do on my own. Happy to say, I was about to reduce the ding size by 95%, and then I bought a kit with matching paint and clear-coat for the scratch. The ding was too ‘sharp’ to pull out completely, but reduced to a 1/4”, barely depressed area. It’s not perfect, but hardly noticeable. Now I won’t stress over keeping the car ‘perfect’. The kit is easy to use, well worth the cost, effort and time. Might come in handy for vehicles of other family, or friends. Recommended. Read more

This kit comes with a lot of parts. You can tell they are cheap. My biggest complaint is the directions tell you to spray alcohol on the puller part to loosen up the glue. Use more alcohol on the glue & plastic scraper to remove the rest. The alcohol does nothing to the glue stick. I tried using 3M adhesive remover & it barely got the glue off my car w/ the scraper. That really ticked me off, incorrect instructions & the spray bottle the gave in the kit broke the 1st time using it. I expected the parts to be cheap. There is no way I would expect to barely get the glue off my car. This kit is basically useless. Read more

Lo compré para arreglar mi refrigerador Samsung. Sinceramente no tenía grandes expectativas acerca del producto pero funciona muy bien. Prácticamente imperceptibles las dos abolladuras en la puerta. Efectivo en un hundimientos circulares, si hay hundimiento lineal cuesta un poco más quitarlo. Read more

I give this $20.00 investment a five start and my time to give a review. Because I own a 2025 Honda Pilot, which I backup into tree. I had two small notable dents on my liftback. And amazingly this is the best $20.00 investment. I ever got such a good return for, the best!!! Do you know how much money this tool saves me. Thank you PS To make the repairs safer for your car, use ( Surface Safe Goo Gone) Is a Gule remover width an oil base texture. Whice makes the removal on the GULE a breeze and help protect my car. Read more