WORKPRO 48 Adjustable Workbench Rubber Wood Top Heavy-Duty Workstation 2000 LBS Load Capacity Hardwood Worktable with Power Outlets

Packaging was good. One package, with all items well packed inside. It was delivered on a rainy day, and I wasn't home for a while, thus I was worried about the packaging. But it held up well, and all items inside were protected and dry. Easy assembly in about 20 minutes, BUT you will need 3 tools: an Allen wrench, a Phillips screwdriver (or ideally an electric screwdriver or drill with screwdriver attachment), and a small drill for drilling the pilot holes. I would NOT want to have installed the 22 screws without a pilot hole and electric drill. A very sturdy bench! The top is very nicely made. The legs are sturdy. I was surprised that the intersection of the cross beams and the legs at the top weren't quite as solid as I would have expected--there is a small gap between them, after connecting. That said, I can see how this can hold significant weight, although I'm a bit skeptical about a ton of it (2000 pounds). The feet are very large (about 3" diameter) and have sturdy rubber pads which should protect floors. They screw in and out to level the table if needed. The power strip is preinstalled (nice!) and seems sturdy. It includes 4 standard receptacles and 2 USB A ports. All in all, a good value for the price. Read more

I looked high and low for a nice and sturdy stand for my new 75 gallon aquarium. I looked on-line and in brick and mortar stores. The pre-made aquarium stands available were either too expensive, not strong enough (in my opinion) or both. Seriously, take a look at some of the aquarium stands sold at the large chain pet stores. They are made from small square tubing. They do not look strong enough at all. Plus they are expensive! I looked around before deciding on this 48" Workpro table. A 75 gallon tank with accessories weighs at least 850 pounds. This table is more than up to the task. When I opened the box I was impressed with the quality of everything. The top is gorgeous! I received a perfect, blemish free top. The metal parts are heavy duty. Nothing is scratched. Nothing is bent. Everything lines up. All hardware was there. Assembly was straight forward. The wood top is made of very hard wood. I would suggest small pilot holes and a power drill / screwdriver to assemble this. I did wonder why Workpro didn't include an Allen wrench. I don't need one as I have a vast tool collection. I don't know that everyone would have an Allen wrench. No matter. Just be prepared to have an Allen wrench set handy when you get this. I did see a comment about the four little metal parts that look like corner braces. Those are used for protecting everything during shipping. They do not do anything. The instructions clearly show a picture of those parts and states that they are not needed and can be discarded. The hardward is good quality. The fit and finish on everything is perfect. I am not using the attached power supply, as 4 outlets are not sufficient for my needs at this time. I zip tied a large surge protector to one of the legs. Another feature that I never thought about when researching an aquarium stand was getting it level. With this work table I was able to fine tune the table to get the aquarium PERFECTLY LEVEL. This table is STRONG and this table is SOLID! It does not move or wobble or sway. NO movement whatsoever. I thought I might have so add some cross braces to provide more support. Nope. This table doesn't need to be reinforced in any way. The added benefit of using this table as an aquarium stand is that I will have a nice work table to use if I decide to take a break from the aquarium hobby. This work table is so nice that I am considering buying one for my garage. Seriously, the table that I received is furniture quality! Read more

Bench top and angle braces came in one box and legs and hardware came in a second box. Not all boxes came at the same time. Both tops showed up days ahead of time. About 4 hours later one box of the legs showed up. Second box showed up the day of the delivery estimate given when I placed the order. Even though the shipping box for each table top showed damage the contents were not affected at all. Tables are easy to assemble. Extra hardware is supplied. I purchased these for building RC model aircraft and needed the table tops to be straight. The angle braces have a gap between them and the table top and when the screws are installed to attach the angle brace the brace bows to close up the gap. This causes the table to warp slightly. So I took the screws back out and added shims between the braces and the table top. The top is now nice and straight. This is a design problem with the way the braces are attached. The warp is minor and is not a problem if the top doesn't need to be perfectly straight. Assembled work benches are quite sturdy and the adjustable foot pads make up for floors that are not perfectly level. Over all, I would recommend these workbenches. Price is a little higher than others but you get what you pay for and this is a quality workbench. Read more

Workbench is surprising stable and solid. Works very well for what it is. Overall I am happy with the quality and functionality. Arrived in good packaging and assembled really easily. Good solid workbench for general home and DIY. Read more