EN

SZJLMKJ

2pcs Arcade Harness 4 8mm 187 Microswitch Terminals 2 Pin 8-Pin to 5-pin Conversion Harness Wires for Jamma

5.0

$29.88

About this item

  • This conversion harness is suitable for any joystick that features 4.8mm (.187") microswitch terminals.
  • The 4.8mm (.187") microswitch terminals 8-Pin to 5-pin Conversion Harness is the perfect choice for connecting joysticks with .187” microswitch terminals and interfacing them to a Sanwa JLF-H harness. Simply connect the harness to the .187” terminals on the joystick microswitches and the other end of this harness will slide into the existing Sanwa JLF-H or JST-XH harness in your fightstick.
  • For microswitch based joysticks, each joystick has 4 x microswitches and each microswitch requires a separate ground and signal wire connection. This is different to a Sanwa JLF series joystick, which has its microswitches soldered on to a PCB and connects via a JLF-H 5 pin harness.
  • By using this 8-Pin to 5-pin Conversion Harness, you can interface most joysticks with .187” microswitch terminals through to a Sanwa JLF-H or JST-XH cable, which makes connection simple.
  • Interfaces to a Sanwa JLF-H or JST-XH cable. Converts joysticks with standard .187” microswitch terminals for use with a Sanwa JLF-H or JST-XH cable.
  • Arcade 4.8mm (.187") Microswitch Ternimals 4.8mm Ternimals 2 Pin 8-Pin to 5-pin Conversion Harness for Jamma MAME Bartop Cabinets Machines The 4.8mm (.187") microswitch terminals 8-Pin to 5-pin Conversion Harness is the perfect choice for connecting joysticks with .187” microswitch terminals and interfacing them to a Sanwa JLF-H harness. Simply connect the harness to the .187” terminals on the joystick microswitches and the other end of this harness will slide into the existing Sanwa JLF-H or JST-XH harness in your fightstick. For microswitch based joysticks, each joystick has 4 x microswitches and each microswitch requires a separate ground and signal wire connection. This is different to a Sanwa JLF series joystick, which has its microswitches soldered on to a PCB and connects via a JLF-H 5 pin harness. By using this 8-Pin to 5-pin Conversion Harness, you can interface most This conversion harness is suitable for any joystick that features 4.8mm (.187") microswitch terminals.; The 4.8mm (.187") microswitch terminals 8-Pin to 5-pin Conversion Harness is the perfect choice for connecting joysticks with .187” microswitch terminals and interfacing them to a Sanwa JLF-H harness. Simpl
Specification

Product facts

Key details

release_date
September 2, 2024
best_sellers_rank
#23,427 in Video Games ( See Top 100 in Video Games ) #344 in PlayStation Accessories #1,294 in PlayStation 4 Accessories #1,717 in PlayStation 5 Accessories
type_of_item
Video Game
language
English
manufacturer
SZJLMKJ

Dimensions and fit

dimensions
4.88 x 3.7 x 0.91 inches; 0.63 ounces
weight
0.634 ounces
package_dimensions
4.88 x 3.7 x 0.91 inches; 0.63 ounces
item_weight
0.634 ounces

Item information

date_first_available
September 2, 2024
Overview

About this item

  • This conversion harness is suitable for any joystick that features 4.8mm (.187") microswitch terminals.
  • The 4.8mm (.187") microswitch terminals 8-Pin to 5-pin Conversion Harness is the perfect choice for connecting joysticks with .187” microswitch terminals and interfacing them to a Sanwa JLF-H harness. Simply connect the harness to the .187” terminals on the joystick microswitches and the other end of this harness will slide into the existing Sanwa JLF-H or JST-XH harness in your fightstick.
  • For microswitch based joysticks, each joystick has 4 x microswitches and each microswitch requires a separate ground and signal wire connection. This is different to a Sanwa JLF series joystick, which has its microswitches soldered on to a PCB and connects via a JLF-H 5 pin harness.
  • By using this 8-Pin to 5-pin Conversion Harness, you can interface most joysticks with .187” microswitch terminals through to a Sanwa JLF-H or JST-XH cable, which makes connection simple.
  • Interfaces to a Sanwa JLF-H or JST-XH cable. Converts joysticks with standard .187” microswitch terminals for use with a Sanwa JLF-H or JST-XH cable.
  • Arcade 4.8mm (.187") Microswitch Ternimals 4.8mm Ternimals 2 Pin 8-Pin to 5-pin Conversion Harness for Jamma MAME Bartop Cabinets Machines The 4.8mm (.187") microswitch terminals 8-Pin to 5-pin Conversion Harness is the perfect choice for connecting joysticks with .187” microswitch terminals and interfacing them to a Sanwa JLF-H harness. Simply connect the harness to the .187” terminals on the joystick microswitches and the other end of this harness will slide into the existing Sanwa JLF-H or JST-XH harness in your fightstick. For microswitch based joysticks, each joystick has 4 x microswitches and each microswitch requires a separate ground and signal wire connection. This is different to a Sanwa JLF series joystick, which has its microswitches soldered on to a PCB and connects via a JLF-H 5 pin harness. By using this 8-Pin to 5-pin Conversion Harness, you can interface most This conversion harness is suitable for any joystick that features 4.8mm (.187") microswitch terminals.; The 4.8mm (.187") microswitch terminals 8-Pin to 5-pin Conversion Harness is the perfect choice for connecting joysticks with .187” microswitch terminals and interfacing them to a Sanwa JLF-H harness. Simpl

Have a question about this product?

Product videos

Product video 1

Customer reviews

Customers say

Customer summary is not available yet.

Reviews with images

Customer review image for Plug n play
See all photos
★★★★★

Worked as Needed for My Install

This was exactly what I needed to install the Knee Lever Neo on my F700 Elite. The wires were a little tight to install, but they didn’t snap and everything works as expected. The wires were neatly zip-tied, which helped keep the install clean. Read more

Poko
★★★★★

Plug n play

Great in a pinch or if you have all the necessary parts/wires but don’t want to spend a bunch of time soldering. Read more

Customer review image for Plug n play
Matthew Warren

Similar Products

Page 1 of 2

We use optional analytics and advertising cookies to understand how visitors use Ventari, measure ads, and improve the experience. You can accept all optional cookies, allow analytics only, or decline them. See our Cookie Policy.