BlueRigger Digital Optical Audio Splitter 1x2 1 in 2 Out Unidirectional Toslink Splitter Support LPCM2 0 Dolby Digital

About this item

• ➤CRYSTAL CLEAR SOUND - Toslink splitter allows you to split sound from optical audio source input eg TV into two receiving output devices, such as a A/V receiver and a soundbar. Please ensure that the connected devices have a Toslink port
• ➤➤NOTE - Output Fiber Optic Toslink cable length should be less than 10 ft for it to work flawlessly
• ➤PLUG AND PLAY - Connect one male input to two female outputs. The two outputs can work together at the same time.
• ➤➤PAY ATTENTION - This is a passive splitter. The signal strength gets divided into two, resulting in weaker signal. If there is sound only on one side or no sound on the other. Note - If you encounter this situation, please contact us promptly.
• ➤COMPATIBILITY - Connect any audio device Soundbar, CD/DVD player, hometheatre system, recorders or Receivers. Perfect for uncompressed PCM audio, compressed 5.1 to 7.1 surround sound systems including Dolby Digital Plus, DTS-HD, ADAT's and LPCM
• ➤WELL BUILT - Durable PVC outer layer, low-jitter optical fibe provide higher fidelity sound and good listening experience.e Precision polished 24K Gold Plated Connector gives optimal signal transfer accuracy .
• ➤TIGHT FIT - The splitter provides a firm connection of Toslink cables by clicking in place. ➤➤Note - Check for loose connections. The cable should be fully inserted into the splitter and must click securely into place.
• ➤ LIFETIME WARRANTY: BlueRigger lifetime warranty and US-based customer support
• Product description The video showcases the product in use. The video guides you through product setup. The video compares multiple products. The video shows the product being unpacked. Toslink Passive Splitter installation Merchant Video Why is there no sound or why does the sound keep flickering? 1. Check if all source & target devices are turned on & properly connected 2. Toslink cables are fully inserted & locked into the splitter only when you feel a click 3. Use Toslink cables shorter than 10FT 4. Please get in touch if the issue persists Why don’t the cables fit? 1. Please remove the transparent cover from the Toslink port of the splitter before inserting into the TV 2. Ensure Toslink cables are fully inserted & locked into the splitter. Note: Most Toslink cables are completely inserted when you feel a click ➤CRYSTAL CLEAR SOUND - Toslink splitter allows you to split sound from optical audio source input eg TV into two receiving output devices, such as a A/V receiver and a soundbar. Please ensure that the connected devices have a Toslink port; ➤➤NOTE - Output Fiber Optic Toslink cable length should be less than 10 ft for it to work flawlessly; ➤PLUG AND PLAY - Connect one ma