INTSUPERMAI Three Rolls Pigment Grinder Machine Laboratory Ointment Milling Machine with Water Cooling System for Paint Ink Color

About this item

• 3 Alloy Steel Rollers -- It is made of alloy steel rollers and cast with chilled alloy casting, thickness of chilled alloy layer is 15 - 25 mm, surface hardness is HS68 ~ 75. By adjusting the handwheel, the gap between the rollers can be adjusted to meet different needs.
• Excellent Grinding Effect -- The speeds of the 3 rollers are 32RPM, 89RPM, 250RPM; The grinding effect is achieved by mutual compression and friction at different speeds on the surface of three horizontal rollers. Grinding three times can achieve a fineness of 3-18μm.
• Compact Structure -- Three-roll mill consists of seat, the guide cover, the roll shaft housing, feeding copper knife, the riving knife plate, the cooling means and gears, pulleys, etc. Its compact structure is stable and durable. It is equipped with a water cooling system, which is more conducive to long-term work.
• Maintenance & Use -- If the thickness of the paint film in the middle and on both sides is different, the amount of cold water can be adjusted; Please avoid grinding corrosive, metal and hard materials; Charging copper knife can't press too hard; Add lubricant in the contact arc frequently; and pay attention to the bearing, it's temperature should not be higher than 45℃.
• Wide Application -- The three roll grinder is mainly used for grinding various paints, inks, pigments, plastics and other slurries. Especially suitable for grinding and dispersing products with high viscosity and fine particle size requirements. Widely used in scientific research, experimentation, formulation, and trace debugging production in the chemical industry.
• Parameters: Roller diameter: 65mm(2.56in) Roller working face length: 125mm(4.92in) Roller speed: Slow: 32 rpm Medium: 89 rpm Fast: 250 rpm Roller speed ratio: 1:2.8:7.8 Motor power: 750W Motor speed: 1400 rpm Machine size: 16.54×15.75×17.32in(420×400×440mm) Net weight: 116lb Shipping size: 20.87×19.69×24.41in Shipping weight: 145lb (Wooden Case) Item included: One set of Three Rolls Pigment Grinder Machine Laboratory Ointment Milling Machine 3 Alloy Steel Rollers -- It is made of alloy steel rollers and cast with chilled alloy casting, thickness of chilled alloy layer is 15 - 25 mm, surface hardness is HS68 ~ 75. By adjusting the handwheel, the gap between the rollers can be adjusted to meet different needs.; Excellent Grinding Effect -- The speeds of the 3 rollers are 32RPM, 89RPM, 250RPM; The grinding effect is achieved by mutual compression and friction at different speeds on the surface of three horizontal rollers. Grinding three times can achieve a fineness of 3-18μm.; Compact Structure -- Three-roll mill consists of seat, the guide cover, the roll shaft housing, feeding copper Rated 5.0 out of 5.