Philips 4300 Series Fully Automatic Espresso Machine - LatteGo Milk Frother 8 Coffee Varieties Intuitive Touch Display Black

6 Month Edit: Still going strong! I love this thing. I can't remember the last time I bought a latte from a store (except maybe during travel). It's definitely going to pay for itself in the next couple months. This thing sparks so much joy in my life! My only small complaint is that the milk froth option only goes up to making a 12 oz latte. The carafe holds enough to make a 16 oz, but you have to run 2 separate milk froths to get there. It's a very small thing but for the future it would be nice. Also for some reason it doesn't "remember" that I usually do 2 espresso shots, so I have to select that each time. Basically my biggest complaints are software complaints ha. The machine itself works so well. It is easy to clean, easy to maintain, and our water is fairly hard but I haven't had to change the water filter yet even though I use it everyday. Still great! I'll try to update at a year 😊 Original Review: I have spent actual years of my life trying to find the cheapest way to make espresso lattes at home. I started simple with an aeropress, a moka pot, upgraded to a cheap espresso maker, bought a grinder, etc, etc. And yet I still found myself buying coffee at coffee shops. I personally didn't have the patience to find the exact right grind and the exact right tamp to get a store quality espresso. I finally caved and bought this 4300 series latte maker. This thing is going to save me so much money over the next year. I've only had it about a week but I've already used it every day and it's perfect. It's SO easy to use. Set up is a breeze. It basically works right out of the box. It comes with a water filter which was nice. Once you get the beans in there, it takes 2-5 shots to "load" the mechanisms and actually put out a shot of espresso and not just water. I did need to adjust the grind to a finer grind (setting 3) to get a good crema. If you adjust it after beans are in, make sure you do it WHILE the grinder is working (you'll have to brew a shot to do this) and be ready to work quickly. I guess if you do it while it's off and there are beans in there you can damage the grinder. I would make sure to read the instructions all the way through, and get familiar with the machine. Once you do, the whole process is a breeze. Once you have your settings dialed in, making a latte is as easy as put a cup underneath, press a button, and go. It takes approximately 1-2 min for a latte. It grinds beans fresh for every shot. If you set everything to the largest settings, you get about a 12 oz latte. Cleaning and maintinence is super easy. The machine steps you through most of it. It tells you the steps to take to install the water filter, tells you when to empty the waste grounds contatiner, gives you multiple cleaning settings. I rinse out the lattego container twice and it takes less than a minute. I feel like this machine is so well thought out and it feels pretty well put together. Overall I have very little to complain about. Once I dialed in my settings, I found the coffee I get out is as yummy as any latte from a coffee shop. My biggest complaints are: - You only get about a 12 oz coffee automatically, if you want a 16 oz or 20 oz, you'll have to do multiple milk froths and espresso runs - The machine is rather loud. It's not a deal breaker for me by any means, but in the morning it can be a little jarring and it always spooks our cats. - Adjusting the grind setting is a bit of a hastle. You have to do it while the machine is running and while it does that , the grind setter wants to move in the opposite direction of which direction you're trying to go so you have to have a pretty decent grip on it. Luckily you should only really have to do this once. - The latteGo carafe leaves about a cm of milk on the bottom even if you've put the right amount in. If you dump and clean it out every time, you'd end up wasting a decent amount of milk. -I've heard people have a hard time using the pre-ground coffee slot and I haven't tried it. But it does get pretty steamy each time it runs which I imagine would make it rather hard to clean. Some tips and tricks I've learned since using this machine: - This thing likes to rinse itself out a lot. (Which is good) but it's a little more hastle to clean out the water catcher on the bottom. I just keep an old coffee cup nearby and let it rinse into that and dump it out every time. It's a lot less cumbersome to clean out. - If you have leftover milk in the latteGo, I do 2-3 automatic rinses to get milk out of the milk tube and then put the whole container in the fridge for the next day. It cleans out the frothing mechanism enough that milk doesn't go bad in there and you don't have to waste the little bit of milk in there. - A lot of regular espresso beans might be too oily for super-automatic espresso machines. Apparently that oil will eventually gunk up the grinder, so it's recommended to buy medium roast beans. You can google some beans that are safe for the machine and find the best ones for you. I like the lavazza brand. - If you're like me and enjoy a flavored latte, invest in some syrups with the pumps. It really really completes the whole "barista at home" thing I was going for. Even better if you can get a tiered holder for all of them! - If you want to be a little extra, get yourself some disposable coffee cups with lids. They're definitely worse for the environment but if you're drinking everyday it can get a little cumbersome making sure you always have a clean travel cup. Or just invest in a bunch of dishwasher safe travel cups! This thing is pricey for sure. But I've definitely spent a long time and a lot of money before this to try to replicate what it can do and it is so worth just spending the money on it. It sparks a little bit of joy for me every time I use it and gives me the quality coffee I want everytime. It is easy to use and maintain. It also makes making multiple lattes a breeze if you are a multi-cup household. As long as it doesn't die within a year- it'll be so so worth it! Read more

---- UPDATE After using this machine for some time, I have to admit, I have changed my mind somewhat, and therefore upgrading to 5 stars. Overall, this is a fantastic machine, despite a few design issues. Under no circumstances consider buying this machine without the LatteGo feature. It's a huge boost, especially for guests who don't know how to make steamed milk manually. Also, you can just snap of the entire assembly and put it in the fridge with remaining milk. They really should offer a separate assembly for manual steaming, though. With respect to espresso quality and crema: always set to max espresso strength and max temperature, this will ensure a decent espresso quality. At least on this model, it is actually very easy to first make an espresso, and then make steamed milk, to pour a cappuccino in the correct way. It will take 10-15 seconds longer, but well. Alternatively, simply stir with a spoon after making an incorrectly poured cappucino. Without doing this the product is really not drinkable, unless you wanted an espresso with foam on the top. Note that after stirring or with semi-manual correct order pouring, the steamed milk is actually quite decent, perhaps even close to perfect. Philips should consider offering an automatic espresso followed by milk pouring option (might consume slightly more electricity), and there should be more options to customize strength, temperature, and most importantly brew time, to make this a perfect machine, but overall this is not bad at all. ---- ORIGINAL REVIEW I have used a De'Longhi ESAM 3300 for the past 12 years until the grinder got stuck (with no repairs in the interim). I'm not even remotely a coffee expert, but that's what I have used to make my morning cappuccino for years. My first impression after an afternoon of use is that this is an an impressive feat of engineering and it looks great in the kitchen, and makes a large variety of coffee drinks in a manner that most will be happy about. However, particularly compared to my old and trusty De'Longhi, this is a very flimsy construction, that also seems to be prone to dropping of parts. I managed to drop the loosely fitted milk lid twice on the floor in the first two hours and also spilled milk several times, which are events that literally never would happen with my old machine. Also, rely annoying that top lid for opening to pour in bins is just loose with no pivotable attachment. Just really inconvenient compared to the De'Longhi, as you have to put it aside instead of just flipping it open. More importantly, there are at least three serious design flaws in this machine, which pretty much means it cannot make serious/proper coffee drinks: 1) It always pours the steamed milk first. You can literally not make a cappuccino this way (it will actually taste and feel completely different) and the only imperfect remedy is to stir the drink with a tea spoon after the machine has finished (or engage in a time consuming and non-supported manual work around). I really do not understand what they were thinking. Did the engineers not study the art of coffee making or consult with notable Baristas? Of course they did, but they apparently did not take it seriously. 2) the brew time is about 8 seconds which is about 2.5-3 times too short. I suspect this has something to do with making and pouring the milk foam first and it may be energy efficient to reuse the same steam pressure, but you can't make a proper espresso like this. Finally, 3) the LatteGo steamed milk is not of good quality; it does not create a velvety micro foam, but instead it seems to be a courser foam that then partially solidifies in the bottom. The result is not impressive, and as noted it will be necessary to stir the drink after preparation to make it tolerable. I understand that most families will enjoy this machine and not be concerned with any of this. However, look elsewhere if you enjoy a proper cappuccino... I will likely keep it, since it allows everyone in the household and guests to make their favorite coffee drink with the press of a button, and most will likely believe it tastes great. Perhaps Philips can do a software/firmware update to fix the incorrect order of milk pouring at least? Read more