TinyBabyFists—November 14, 2024
⭐️⭐️⭐️⭐️⭐️ Let me tell y’all something—this tripod? OH, IT AIN’T JUST A TRIPOD. This here is a GAME-CHANGER. We’re talking stability so solid, it could hold up the Leaning Tower of Pisa. And that mid-level spreader? WHEW, it’s like the secret sauce on your mama’s barbecue. Smooth, sturdy, and oh-so-satisfying. You got a heavy camera? No problem, partner. This baby will cradle your gear like it’s rocking a newborn to sleep. Setting up? So easy, it’s like the tripod is reading your mind. You’ll be locked and leveled faster than a cheetah on espresso. I’ve used a lot of tripods, but this one? THIS ONE RIGHT HERE? It’s the Rolls Royce of camera support. I’d marry it if I could. If you don’t have this in your gear bag, are you even a filmmaker? Don’t think, just click ‘Buy Now.’ Your shots—and your life—will thank you. Read more
CPHT—February 28, 2025
EDIT/UPDATE 3/27/2025: After spending quite a bit of time with the VHS10 head, I have found a shortcoming. It may not affect your shooting if you are not doing very precise work with long lenses. I am, and have found a problem. Using a 150mm (Sirui Venus) lens and doing precise, slow moves, it is almost impossible to come to a rock-steady stop frame. The head does a little back pan after you gently stop the pan on the frame you desire. It's small, and you could cut the shot early in the edit...unless your work/shot is largely a still life/landscape with depth...which is a kind of shot that requires the shot linger on that final composition. It's mild, but a dead giveaway/compromise of the shot. I tried/verified this on both of the VHS10s I have; same problem with both. You might be able to overcome this with multiple takes/attempts for each shot, but that may not be a luxury you have. This is a big deal to my work, so I'm up in the air on whether to keep this, but purchase a higher end head for long lens shots. Unfortunately, overcoming this means moving up to larger, heavier, MUCH more expensive 100mm bowl gear. Very nice head in every way, otherwise. END of EDIT/UPDATE. I am preparing for a lot of video shooting that will consist of a significant amount of longer focal lengths. I tried one fluid head that I thought was going to do the job, but discovered that is was not stable enough with lenses over 75mm, despite being well below its max load spec. By that I mean "jiggly" with the lightest touch on a static shot. This Sirui was what I chose to try next. Even in the photos of the listing, it just looks beefier and its max load spec is higher. In the photo, you can see it is likely that the large base plate and heavy-duty locking mechanism are what account for the stability. It did not disappoint. In fact, I'm extremely impressed with it in every way. The head is just beefier and bigger. Yes, heavier, but that is the price for stability in this scenario. It's pan and tilt damping is good and strong. You can adjust it to be quite stiff (resistant) to movement. It is as close to what I am accustomed to in my professional career in features, the O'Connor 2575, as I have found in prosumer products. My wife is accustomed to seeing me at work with either a Panahead or an O'Connor 2575. Upon seeing the Sirui, she approvingly commented "That's more like what I'm used to seeing you use." The tripod is much more like in the pro world, too. Ingenious leg extension/lowering design with just one clamp for each leg up top; no bending over to multiple clamps. Quick changes. Great ball leveler. The ground spreader keeps the legs under control, but can easily be removed if out on soil where you can spike the feet into the ground. I like it so much that I bought a second as a backup. Cheers, RF, SOC Read more
Zachary Barnes—October 31, 2024
Very good workhorse tripod. Going to get the next version up for my second tripod. Totally a steal of a deal. Fluid head is GREAT quality and the tripod is VERY sturdy. It hold my black magic rigged out with cine lenses, wireless follow focus, mateebox, v mounts, monitor etc with no problem. highly recommend. Read more
PomanFerrari—February 12, 2025
Likes solid build easy to adjust latch and relatively light. The counter balance on the head is a huge deal because it allows the camera to stay in place when you stop panning or tilting. Without the counter balance, you have to constantly balance the camera with your hands. Dislike being that I have to purchase a separate middle spreader. Without the middle spreader, you cannot lay on uneven ground. For example, you cannot set up the tripod on a bleacher for sport event with the bottom spreader. If you remove the bottom spreader, the three lakes will spread out flat. Read more
WELLINGTON ROMANHOL—November 30, 2025
Very practical and functional. Read more
D. Ho—January 9, 2025
This carbon fiber video tripod has a 75mm bowl and 3 section legs. Its claim-to-fame is its quick adjustment feature meaning it can be setup in about 20 seconds. Considering its price and features, I can recommend this video tripod. However, there is one downside to be aware of -- between each join of carbon fiber tubing, there is a small bit of play there. This is probably necessary due to the design of the quick-release/locking mechanism. Compared to my rock-solid, 20 year old 5 lb Gitzo Traveler carbon fiber tripod, the play is noticeable but not worrying. I do accept the compromise. To negate the play in the tripod legs, a mid-level spreader is provided which I feel is useless in making the legs more secure. Using a tripod apron/hammock/bag to add weight to the tripod is a much better idea. Sirui does provide a nice traveling bag and hex tools needed to adjust the tripod. Read more
Lance Newton—September 11, 2025
Best tripod I've used. Hooked right up to my arri dovetail on my fs700. Read more
Anthony Garza—January 2, 2025
Had this for a few weeks and was loving it. Didn't thoroughly test out the safety lock on the mounting plate; if I would have done that I would of realized the safety mechanism to keep the lens in place is useless. The scenario is if you have the lock undone, and the tripod gets tilted, the safety lock will fail if it leans slightly left. I know this because I was adjusting the base plates postition back and forth and slid the tripod 4 inches right. A brand new 70 to 200 busted in the blink of an eye. MY SUGGESTION, is if you are MANFROTTO, stay manfrotto. I wanted to loved this tripod as I loved my monopod, but this product cost me a 1200 brand new lens and I am fuming about it. What genius let that get past user testing deserves a 1 star as well. AVOID this tripod and protect your gear, I am grateful the camera body still works. Read more