WALI Extra Tall Dual LCD Monitor Fully Adjustable Desk Mount Fits 2 Screens up to 27 inch 22

This is a great Buy it is built strong comes with everything you need easy to put together but what I really like was the strength of the pole that holds everything it's made of heavy engage alloy or Steel with a good size pin Read more

I was practically done setting this up in less than 15 minutes and by far the easiests of the mounts I have ever assembled/used/tested. I chose this product as it was a taller mount and offered to mount a pair of monitors (upto 27") on top of my existing 32" monitor setup (3-pairs). This was both a requirement and a nessecity and I didn't have much room to play with the positioning of the vertical pole/stand and the arms and the existing real-estate. The design/flexibility of the product (maneuvering the arms for perfect positioning) was truly awesome in my openion. And hanging the monitors was a breeze. Very happy with the product and will probably stick to the brand in future. The vetical pole is about 1.5" in diameter and might not feel sturdy enough (I previously had 2.5" diameter poles) but it does the job very nicely and I am really happy with the end result. Overall, very well thought out design and practical in applicability (not overweight and not flimsy...money well spent). I would highly recommend this to anyone using upto 27" monitors weighing around 10-12 lbs. Read more

Outstanding monitor desk mount....pictures were a bit deceptive, its actually much more robust than it looks. Well made, although there was a slight issue with a missing washer...but I had a spare to use. I highly recommend this desk mount especially if you need the monitors to be higher than normal, like for a standing desk. This one was the third one I've bought from this supplier because they work! I have a total of 6 monitors on my desk...you can trust my pick! Read more

Good overall, with some adjustments. Pole screws together solid and the set screw holds that in place nicely for a very stable mount. The key to a stable overall setup starts with the base clamp to the desk, and of course a solid desk. It comes with both a grommet style and a clamp style (what I used) desk mount. The next portion are the arms. These are overall good and sturdy with a wide range of motion for adjustment, but you will be upset with it if you don't tighten them up once you get the position mostly figured out. The biggest place this is needed is the tilt portion, which needs to be REALLY cranked down to not have sag over time, basically to the point of immovability, or it will sag the angle. As I'm not looking to continually adjust the display (get a gas strut style if you are), this is a very solid stand that works well for my needs. Read more

This was exactly what I was looking for when building my WFH office. Holds the monitors very nicely and is easy to install. Cable management can be a little cumbersome if you have some thicker cables but I would recommend this mount for sure. Read more

This item is sturdy, heavy-duty, tall, and sufficiently customizable. It is not fancy or soft around the edges. Literally. Some of the metal work still has rough edges and leftover material from the machining process. I got a mild metal "splinter", and I found a long coil of machined steel scrap (it almost looked like a spring or coil from a spiral notebook) in the carpet after putting this together on the floor. But, I will give this five stars anyway, as this was almost precisely what I needed, at an excellent price. I now have two 24" monitors mounted over my Samsung ultrawide, which is itself 20" tall. The fact that this is mounted this solidly to my desk with the included clamp, and no holes drilled (although the hardware was included to do that, if I wanted), is an impressive feat. The mounts are centered at 29" above my desk, with room to raise it another two inches or so, if needed. I'm able to adjust the monitors along roll, pitch, and yaw directions, with some minor limitations. Read more

Super easy to use and setup. My only complaint would be that sometimes heavier monitors make the final joint by the vesa mount sag, so you have to crank down on the tightening screw so hard that it completely locks in place. However, I do have a 25-30 lb iMac monitor on one of the arms. That is not a problem at all for the normal sized monitor in the other arm. I mounted the clamp base into a veridesk, so because of the mounting surface this isn’t perfectly rock solid, but if you had a gromit base mounted into a heavy desk, you could probably tow your car out of a ditch with a winch looped around that vertical mounting post. With the setup that I have, I only used one of the sections for that main vertical post. If I kept it screwed on you would be able to see it clearly over the monitors. In fact it’s got me thinking about putting it back on and adding a third monitor or something up above. This setup, clamped to a veridesk with all of that weight is a little bit flimsy, the monitors rock slightly under the weight when raising or lowering the desk, and sometimes it will rock a little when I lean against the desk or move it at all, but other than that it’s holding everything securely. I’ve had that all up for a month or so, and I have no concern that it can’t handle the weight Read more

I bought two of these for myself, one for my husband, and one for my friend. Any time someone asks me for a monitor mount, I point them to this one. They are amazing, hold up so well. I have an ultra wide and a 1080p on one and a 4k and another 1080p on the other one. this holds the ultra wide easily above my 4k to allow for the other monitors on either side. It's so good! And I use it on a standing desk without issue. It works great! Read more