2FT LED Linear High Bay Light 4000K 5000K 6000K 100W 150W 200W Adjustable 0-10V Dimmable 150LM W Shop

You won't need any other lights in your garage once you install this. Before installing this light, I had 3 single LED shop lights in my garage in a U-shape to cover as much of the garage as I could. I was very happy with the amount of lighting, but as the lights shot straight down, some areas didn't get much light. These lights were packaged nicely and well-protected. Once you open up the package, you will need to decide how you plan to wire up the lights. I decided to use this as a plug-in light, so I opened up the cover and used the wire nuts to connect the cable. Be sure to push the cable in the right orientation to have the cover go back on correctly. After wiring it up, you need to figure out where you plan to hang this light. I wish this had the ceiling hook part included. However, I had some spare parts from my other project, so I found the beams and installed the hooks. This light was extremely bright. I even set it to the lowest power setting and set the color to cool white, and it lit up the entire garage. Because you can angle the lights on both sides, I'm able to cover a lot of space with the light. Initially, I wanted to light up my garage rack and the ground, but I realized that the angles had to be equal on both sides or the light would be off balance. In either case, these lights made the garage super bright. I was planning to install both lights in the garage, but that would have been overkill. I'm extremely happy with these lights. They were easy to install and connect. They produce bright light to fill a 2-car garage with high ceilings. These are a bit on the pricier side, but considering they were meant for industrial/commercial use, I'm hoping they last a long time. Read more

3-Wattage/3-CCT Selectable & ETL Listed with 5-Year Warranty – Not Fixed Output or Uncertified I've specified commercial lighting for warehouses and workshops, and the combination of ETL certification and a 5-year warranty is a significant differentiator. Many unbranded high bay fixtures lack independent safety testing, which can create issues with insurance, permitting, and professional electrician acceptance. This unit carries ETL listing, meaning it has passed recognized safety standards for commercial installation. The 3-level selectable wattage (100W/150W/200W) and 3-CCT selectable color temperature (4000K/5000K/6000K) offer exceptional flexibility from a single fixture. Most competitors offer either fixed output or limited options. Being able to adjust both power and color temperature on-site means you can match existing lighting or tune for specific tasks without ordering multiple SKUs. At 150 lm/W efficiency, the 200W setting delivers 30,000 lumens—appropriate for warehouse aisles, manufacturing floors, or large workshops. The 0-10V dimming allows further fine-tuning from 10-100% brightness using standard commercial dimming controls. The adjustable mounting angle is a practical feature for directing light exactly where needed—down aisles, onto workbenches, or away from obstructions. Many fixed linear bays can't be aimed after installation. The dual installation options (hardwired or plug-and-play with included 5.25ft cord) provide flexibility for permanent installs or temporary/trade show setups. The included cord is a thoughtful addition often sold separately. The housing is metal with good thermal management—important for maintaining LED lifespan and lumen maintenance. This initial review is based on ETL listing verification, wattage/CCT switching test, dimming function check, light output assessment, and build quality inspection. I will update after extended operation in a commercial/workshop environment to report on driver reliability, lumen maintenance, dimming consistency, and long-term performance under the 5-year warranty coverage. Read more

My husband was looking for a light for over his work bench in our barn when I saw this. Since it came in a two pack we thought putting both above the bench would light it up nicely. We were both quite surprised at the brightness of the light and decided that both would be way too bright so he mounted the second one in our shed. As you can see in the first of the shed pictures originally the only light source was an LED shoplight that worked but not nearly as well as the High Bay light. The second she’d picture is the light from just the High Bay light and the fan light, it definitely makes it a lot brighter! The second she’d picture is the High Bay light on high, the picture of the light over the workbench is the second light but only on low. In fact, it was so bright that my husband had to add a board to kind of box it in! It came well packed and was so easy to put together (basically just attach the cord to the light with the connectors that came with it), hang it and plug it in!it is very well made and definitely well worth the price! In my opinion a great investment. Read more

This selectable LED linear high bay light works extremely well with its 3 wattage options and 3 color temperatures, making it easy to match different areas in a warehouse or workshop. The brightness is excellent, and the 0–10V dimming gives smooth control without flicker. The adjustable mounting angle is a big plus for aiming light exactly where it’s needed. Installation is flexible with both hardwired and plug‑and‑play options, and the metal housing feels durable and well‑built. With a 5‑year warranty, it offers great value for the money, and I recommend it to anyone upgrading their commercial lighting. Read more