I just got this today. I have an iPad pro in a case, a slim laptop, a work tablet in a chunky case, and a keyboard for the iPad. The laptop and iPad fit in two of the middle sections perfectly without me having to adjust them (just good, dumb luck, but I'll take it). The keyboard is in the end slot that's about an inch wide, and it leans on the iPad but it's very secure. The work tablet is in the other end slot, and it leans up against the side of the book shelf that the stand sits on. Everything is solid held in place and now it all takes up SO MUCH less space than before, and none of it is stacked so I don't have to shuffle things to get to the device I need. . The silicone on the bottom of the base and in each slot is thick enough to mitigate damage from scratches and damage from light pressure, and it also keeps the base in place and keeps items in the end slots from slipping. . This thing is HEAVY for its size, which you want. It keeps it stable and adds to it not moving when you take devices in and out. . I've seen in other reviews that the screw heads aren't well formed and that they don't properly fit the Allen wrench that comes with the stand. I'm happy to report that the I checked the wrench on all the screw heads and it had a tiny bit of wiggle room, like a properly fitting wrench and screw head combo should. I didn't try to loosen the screws as the dividers wet already perfectly positioned for my needs, but the screws seem like they're fine; the head sockets are definitely not improperly formed. . One last thing: the finish seems to be painted and not anodized. In my experience, paint that looks like this on Aluminum tends to wear off easily. Hopefully, given that this thing's job is to sit on a shelf, that won't be much of a factor. . Overall, I love this device stand/holder. It freed up a ton of space on my shelf and made it easier to plug my devices in to charge. It's heavy and heavy duty, and well made. I think it's well worth the price and I'm very happy with it. Read more
I bought this to hold my MacBook Pro vertically after I got a second 27" monitor and no longer had space for a more traditional laptop stand. Unfortunately, that new monitor died within a month, and after returning it, I decided to try using my MacBook as a full-time second display, so no longer really needed the vertical stand for its original purpose. However, the stand is so well-made, I decided to keep it and find other uses for it. It's currently holding a game controller, a MIDI controller, and an iPad mini. I love that just about every conceivable contact point is wrapped in cushiony silicone, but it's also very heavy and stable. The storage slot for the Allen wrench for adjusting the middle slots is a nice touch, as well. Read more
Solidly holds 3 notebooks with no movement. This stand is substantial, it weighs more than I thought it would. It was easy to adjust to the size of each PC and provides a trusty spot to place them. I am much happier with it than I expected. Read more
As an engineer who has lots of devices on their desk at any given time, I really need a solution to keep the mess under control, with several laptops docked and accessible at a moment's notice. When I saw this item up for review, I was excited at the promise of a 4-device stand, but the reality is a bit more complex. It's still a nice product, but you should be aware of its limitations. The construction here is weighty, solid metal: it feels like a block of machined aluminum on the outside but heavier on the inside. There are two movable holders and a central fixed divider; this gives you two fixed-size outer compartments and two adjustable-sized inner compartments. The compartments have rubber protectors at the top (very effective) and strips of rubber in the bottom (less effective as they don't cover the full area). The good news: this will not move on your desk, even if you load it down with heavy laptops. It's quite remarkable, actually - it's weighty and solid. Well done. It's also nicely manufactured with some thoughtful touches - the allen wrench needed to adjust the holders snaps into a compartment on the base so it won't get lost, and they even embedded a tiny magnet to keep it held into place. Details matter. The issue for me is that this is really only a two device holder. The central compartments are adjustable and are about 1.5" tall, which is enough to keep most laptops fixed in place. (The minimum size is actually an issue for some laptops - it's a bit too big for a MacBook Air 15 without a case to not wobble, and it would be nice if it adjusted smaller or if a shim were available). But the outer compartments are borderline useless. They only have a 1/2" tall lip on the outside, so anything you put in there falls out immediately unless you balance it against whatever's in the middle, scratching up your laptop - and making the outer item fall out if the inner item is moved. It's all just not very well thought out, and the outer lips might as well not exist at all. I certainly wouldn't market this as a "4-device holder" - I would even have issues placing a phone here in portrait mode. My other small complaint is that when a compartment is expanded beyond the minimum size, the gaps in the base create an area that could scratch your laptop. That's solvable with a bit of soft material in the bottom though, so it's less of a concern; I would have made the rubberized strip in the bottom a little thicker to elevate the laptop a bit more and added small extra strips on the outer edges if I was designing this, though. This is very fairly priced for what you get, and $15 per laptop is pretty fair for a very nice 2-laptop stand. Just think of it as a two laptop stand with two weirdly useless lips, not as a 4-laptop stand, which is what I was hoping for. Read more
I bought this Elestoria 4 Device Vertical Laptop Stand recently and I’m really impressed! The build quality is excellent—very sturdy aluminum with a clean, modern look that fits perfectly on my desk. I use it to hold my MacBook, iPad, and phone, and everything stays secure without wobbling. One of my main concerns was avoiding scratches on my devices, but the silicone padding in each slot provides great protection. Just make sure to adjust the width properly to get a snug fit—that helps prevent unnecessary movement. This stand has seriously helped me organize my workspace and reduce clutter. Highly recommend it if you want something both functional and sleek! Read more
Great product. Heavy and well made. Holds multiple devices perfectly. Compact and fits on my nightstand well. Could not be happier with my purchase. Read more
Excellent. Sturdy. Adjustable Read more
