Meepo Electronic Skateboards Replaceable PU Sleeves for Hub Motor 2 pcs 100mm

my 90mm wheels were pretty beat up and i didn't know if it was worth the money to upgrade to these wheels but it's so much smoother with these wheels. When installing the bolts I found it best to install them slowly like a car tire going in a star pattern to tighten them down. some bolts where tricky but take your time. if a bolt doesn't feel like it's going in all the way back it out and try another bolt. They gave me an extra bolt which was nice because I almost stripped the threads. Read more

This is a part from Meepo directly and fit my brand new Meepo V3. This is a must have replacement for the 90mm sleeves and wheels. I got a much better, smoother ride from these sleeves than on the 90mm. Frankly, Meepo should ship their boards with 100mm from now on simply because of the smoothness of the ride. One note on sleeve removal: you must unscrew the hex bolts from the back of the wheels in order to pull the magnetic sleeve from the rest of the motor. DO NOT USE THE HEX TOOL THAT COMES WITH THE MEEPO KIT. You will get a much better experience if you use a RATCHET fitted with the proper size of the hex screw (1/8"). I tried using the hex tool from the Meepo kit. The metal used on that tool was much too soft for two of the bolts and so I STRIPPED THEM!!! This was such a tremendous pain in arse. I ended up using a dremel tool to etch new notches in the stuck bolts and used a tiny screwdriver on a ratchet to slowly remove it. I would've avoided all that hassle if I had just used a ratchet with the proper size hex. So...if you purchase these 100mm wheels, USE A RATCHET with a 1/8" hex head to remove the screws on the hub motors. You won't strip screws and you can get the job done quickly. Read more

I honestly didn’t think when I was replacing parts on my board that I would feel as much of a difference as I did with new sleeves Read more

I like there size difference on the mini2 Read more

Fit almost perfectly but work. One wheel and one screw.....screw didnt fit the hole. It was drilled to small. Rides fine with 5 of 6 screws but wow poor quality control. Will fix myself Read more

Improved ride quality. Feet no longer hurt after 20min Read more

when I received it I took all my old wheels off and installed this one only to find out on the last screw they forgot to tap the threads so I had to take it off again. if you look at it, it looks like they all have a holes but one of them is just the pilot hole and it doesn’t actually have the threads. Meepo has horrible QC Read more

Update 1/27/22: So I decided to try them out. When I tried the screw fitment prior to mounting the wheels to the board, I noticed a thin rubber coat around the screw holes. All but one was the perfect shape of the hole. The last hole was partially covered by a rubber coating, making the hole appear smaller, and also provided enough of a barrier that I couldn't thread the screw in by hand. Fast-forward to today. I mounted wheels with all the screws tightly in place, then decided to try out the remaining hole for good measure. Low and behold, once the wheel was secure on the motor, I threaded the last screw without any problems. Now, there's still the issue of the chipped magnet in the other wheel. I took it out for a test ride and so far it doesn't seem to be an issue. Based on some other reviews, they may not last long enough to become an issue, so time will tell. With all that said, I changed my rating from 1 star to 3 stars. I'm pretty satisfied for now. FYI: The board I installed them on is the Meepo Mini V2. Upgraded from the stock 90mm to 100mm wheels. ================================================================================ Old review: I noticed the negative reviews and chose to ignore them hoping that it wouldn't happen to me. It has worked before, but not this time. As you can see in the pictures, there's a chipped magnet on one wheel and a tap that is way too small to fit the screw on the other. These cannot go on my board, but they can go back for a refund! If the seller is reading this, I will accept a suitable (quality tested) replacement, otherwise I'll need my money back. Read more