This glue took me by suprise. I was concerned since I was adhering two large 3d printed (PLA) parts together, that some glue wouldn't work well.Initially I applied slight sanding to both faces and put the glue on and out the faces together. Within about 3 minutes they held well together to where I couldn't pull them apart. After curing for 24 hours it held really well! After this learning, I tried to adhere two faces with no sanding, the pieces adhered in a matter of seconds (which kinda messed me up as I didnt align the pieces perfectly). I even had a small surface area where I bonded two surfaces slightly, however upon testing I was able to pick piece up from one end and it support the whole objects weight (in the photo the antenna piece). Id wear gloves and a mask. Even though the nozzle makes it easy to apply little amounts of glue, if you put too much it gets stuck to your hands and requires dawn soap for like 15 minutes and lots of scrubbing to come off. The mask is recommend if youre sensitive to smells as it has a strong smell before its cured. Overall Id recommend the glue for 3d printed projects as its very strong and seems to bond well with PLA. TLDR: Glue works great for 3d prints. Use gloves, and work in a ventilated surface to avoid the smell. Read more
I had a brand new pair of glasses that simple broke across the nose piece. It appeared to be a material defect, as they were literally sitting on the counter and broke when I picked them up. I tried other “strong hold” glues that I had at home with NO success. I found this product and it claimed to work on glasses. IT IS AMAZING!! One drop on my glasses, held it for about two minutes and set aside until the next day to dry. They were holding wonderfully!! This company makes several types of glue for many different surfaces. I will definitely reorder if I need another type. Price is reasonable. Read more
I had two nails shot out of my tire and catastrophically lose all the air. I was close to home and drove about 10 miles and hour for half a mile. I jacked the car up and saw two holes where nails had been. I tried putting. plug in each with the adhesive that came with the plugs. The tires were loosing 20 psi every couple of ours. So I ordered this stuff on account of Project Farm recomendation IYKYK. A great value since this stuff actually works. While I waited two weeks for my new tires and rims to come in the plugs I put in, two each, since the hole was big, this stuff was durable and sealed them an di had no leaks. I read the instructions and let the rubber cement dry over night. It's a clear color. There is an enough rubber cement to do many tires. I like having this can in my garage. Read more
I used the Meuvcol Super Glue for Plastic on several small plastic projects. It created a very strong bond and held pieces together reliably, making it effective for heavy-duty plastic repairs. The main downside is the tip—it dries out fairly quickly, which can make application messy and sometimes hard to control. It’s also very easy to get glue on your fingers, so caution is needed during use. Overall, it’s a strong and reliable plastic adhesive, but the packaging and tip design could be improved for cleaner application. Read more
I've used this to attach my RC car tires and repair a loose flap of rubber on my winter tires for my MX-5. Works way better on tire rubber than anything else I've tried, including rubber cement made for tire repair. It was more than a really needed but it's been useful enough that I use it for gluing nearly everything involving rubber or other flexible joints. Read more
Simple - it's super glue and it works well. Exactly what you would expect. This particular one had a great price point too. The other thing - SUPER UNDERRRATED is the little needle applicator and screw on top. They included multiple needle applicators and the screw on top actually sealed - meaning you can use this super glue over and over without the tip or bottle drying out. Awesome little features. I'd buy again 100%. Read more
This absolutely works. Bought it to fix a pole on a train set. My son repaired it- and I had my doubts. I told him it would be like gluing a dancing angel back on the head of a pen, LOL. But it worked the first time & shows no weakness. Read more
Works well: easy to add to metal parts. Adheres quickly. Read more
