Toilet Bidet Attachment Non-Electric Dual Nozzle Self-Cleaning Frontal Rear Wash Adjustable Water Pressure Fresh Cold Water Sprayer Ultra-Slim

The bidet arrived safe in its own box. Looking the parts over there were some questions I had, but as I started to install it, it all pretty much made sense. The directions were OK. I think they could’ve been better but for the most part answered some questions Installation was relatively easy. Remove the toilet seat, shut off the water at the shut off, remove the hose from the bottom of the tank have a towel ready there will be a little bit of dribble. Install the T that’s included in the kit. Make sure your rubber seal is pushed in all the way and square inside the threads, tighten that up with the T facing forward, don’t tighten it too much. Just a good snug fit is all you need. You can then hook up your hose again to the bottom of the adapter. Now put together the bidet remembering to put the rubber half circles anti-slip things underneath. It’s pretty self-explanatory where they go. They will fit into their own places.. align the bidet all the way, so it’s bumping up against the toilet rim and then the seat goes on, before you tighten the seat make sure everything is square and the seat is lined up as it should be. Once the seat is on, it’s time to put the 3/8 hose on from the bidet to the T. I made sure my hose made it its way as close to the toilet as possible before I tightened it, that way if you need to vacuum or clean back there it’s kind of out of the way. The hose was plenty long . Once again don’t over tighten just a good snug fit with these two fittings. Once the hose is on, you can turn on your water and check for leaks.Just make sure that the two control knobs are in the 12 o’clock position. Otherwise you will get a bath. Once you have the water on it’s time to kind of understand how this thing works. You can place your hand in front of the sprayers and spend time using the knobs. The top one is pretty much a water pressure off on rotary. The bottom dial is where you’ll have to kind of understand what happens, they claim it’s a female setting and a bidet setting. I don’t quite get that but you can see what happens when you change it. One of the sprayers is activated or the other one is activated. I don’t understand what the middle setting does other than kind of clean that back area I guess. So does it work? Yes it’s quite an experience for the first time and does a pretty good job. I think the build quality is pretty good. You’re not going to be able to put lots of pressure on that bidet setting area. It’s not designed to help you get off the toilet so don’t expect that. This is a cold water bidet so it’ll wake you up. The kit included some plumbers tape, but I did not need that. All in all, I think this is a good entry-level bidet. It works good, it installs good. I don’t see any weak areas so I think it’s a good value. Read more

I received the Toilet Bidet Attachment Non-Electric Dual Nozzle – Self-Cleaning Frontal & Rear Wash, Adjustable Water Pressure, Fresh Cold Water Sprayer, Ultra-Slim Easy to Install, Toilet Seat Attachment (Chrome) and after using it for a few weeks, I’m very pleased with how it performs. What I am using it for As someone who’s always appreciated added hygiene in the bathroom, but didn’t want something overly complicated or expensive, I opted for a non-electric cold-water bidet attachment. I installed this unit on my standard toilet seat. Installation took maybe 15–20 minutes (with basic tools). What stands out / positives 1. The dual-nozzle design (frontal + rear wash) works well: you get a gentle clean in the front and a stronger spray for the rear — both feel more thorough than just toilet paper alone. 2. Adjustable water pressure is a major plus. I like that I can dial it gently when I’m just waking up, and increase slightly when I want stronger flow. 3. The ultra-slim, chrome-trim design fits neatly under the toilet seat and doesn’t change the look of the bathroom or require big modifications. 4. It’s non-electric, so no power cord, no heating element, no complicated wiring — simpler is better in my view. 5. Cold-water only (which is important to note) did not feel like a downside for me: the water is fresh and cool, which feels clean and refreshing. In warmer climates, it works fine. 6. The self-cleaning nozzle mechanism gives me confidence that the spray path stays hygienic. A few caveats/things to know: - Because it’s strictly cold water, if you live in a very cold area or prefer warm water sprays, this may not satisfy that preference. (For me, this was fine; I live in a warm region, so cold water is acceptable.) - Installation requires removing the toilet seat, aligning the attachment, and connecting the T-valve to the toilet’s water supply. If you’re completely unfamiliar with plumbing, you might spend a little more time or want to watch a tutorial. - The control knob (or lever) for adjusting flow is a manual step — if you’re used to more automated bidets with heated seats, this is simpler and has fewer features. - Because it’s non-heated, it’s really about function and simplicity rather than premium comfort. Would I recommend it? Yes — I would, especially for someone looking for a cost-effective, easy-to-install, no-fuss bidet attachment that improves hygiene without major upgrade cost. If you’re okay with a cold-water spray and don’t need heated seats or high-end features, this is a solid choice. Bottom line If you’re looking for a dependable bidet attachment that covers the essentials (frontal & rear wash, adjustable pressure, slim design, no power required), this product delivers. It’s a great upgrade from toilet paper alone, and it fits nicely into a standard bathroom setup with minimal fuss. Highly recommended for what it is. Read more

Most of the toilets in my home are European-style D-shaped toilets. Typical standard or elongated bidet seats will not fit this style of toilet. This bidet attachment is a perfect alternative to bidet seats and a great value. It easily fits between the toilet flange and the existing toilet seat, so it will adapt to most any style of toilet. I like the solid white appearance which gives it an air of elegance. Installation is straightforward, there's a T adapter that connects to the toilet fill valve. If you can change a toilet valve this should be no problem to install without leakage. Cleaning the nozzles is automatic, they are rinsed before and after each use. At first, I was thinking that having warm water was a necessity. I have found it to be a non-issue that this bidet uses room temperature cold water. I hope this information was helpful. use --- This review is for: Bidet Attachment for Toilet, Toilet Bidet with Dual Self-Cleaning Nozzles, Rear and Feminine Wash, Adjustable Spray Pressure, Easy Installation, Hygienic Bathroom Accessory, Ceramic White Style: EB012 | Color: White Read more