EN

ENERWAVE

Enerwave ZB-333-W ZigBee Module Plug-In Outlet for ZigBee Home Automation Smart Outlet Smart Switch Outlet Zig Bee Appliance

4.6

$78.00

About this item

  • Compatible only with SmartThings STH-ETH-200 or older, Orvibo, and Harmony with ZigBee Extender hubs. Zigbee plug in wall outlet enables remote control of floor/table lamps, fans, computers, or TVs from anywhere with any Wifi connected device
  • One ZigBee controlled outlet and one always-on AC outlet. Remotely turn ON/OFF appliance via smartphone or computer apps after added to a compatible ZigBee gateway. No wiring needed
  • Can be controlled in scenes or groups of multiple ZigBee devices for smarter control. Acts as a signal repeater to boost the network
  • Wireless ZigBee technology uses mesh networking to expand network reach and eliminate points of failure; built on 2.4GHz for worldwide use; uses a variety of security mechanisms such as AES-128 encryption, device and network keys, and frame counters
  • ZigBee frequency: 2.4GHz, HA 1.2 Certification; 120VAC; Incandescent: 1000W, Motor: 1/3 HP, Ballast: 1200VA, Resistive: 1800W(15A); FCC compliant. Device type code is required to work with SmartThings
  • Enerwave ZB-333 Z-Wave Wireless Plug-in Module allows you to remotely switch ON/OFF lights and small appliances such as the floor and table lamp, fan, computer, TV, speakers, and more from anywhere. With no wiring needed, you can easily upgrade your home to a smart home by adding this ZigBee outlet to your home automation system. The Enerwave ZB-333 ZigBee Plug has two outlets, one ZigBee enabled for appliances you want controlled via ZigBee, and another always-on AC outlet for other electrical appliances. If you forget to turn off the fan, speaker, TV or lights downstairs, just do it from your smartphone or computer! Through the ZigBee outlet switch, control appliances and group with other devices as part of a scene in your home automation network. Simultaneously control your fan downstairs with lights and other smart devices upstairs or in the Compatible only with SmartThings STH-ETH-200 or older, Orvibo, and Harmony with ZigBee Extender hubs. Zigbee plug in wall outlet enables remote control of floor/table lamps, fans, computers, or TVs from anywhere with any Wifi connected device; One ZigBee controlled outlet and one always-on AC outlet. Remotely turn ON/OFF appliance via smart
Specification

Product facts

Key details

color_spec
‎White
manufacturer
Enerlites
part_number
ZB-333-W
is_discontinued_by_manufacturer
No
color
White

Dimensions and fit

dimensions
‎5 x 2.99 x 2.2 inches
weight
‎6.4 ounces
item_weight
6.4 ounces
package_dimensions
5 x 2.99 x 2.2 inches

Technical specifications

item_model_number
ZB-333-W
voltage
120 Volts

Item information

wattage
1800 watts
item_package_quantity
1
number_of_pieces
1
mounting_type
Wall Mount
switch_style
Dimmer Switch
certification
Certification
batteries_included
No
batteries_required
No
date_first_available
June 2, 2017
Overview

About this item

  • Compatible only with SmartThings STH-ETH-200 or older, Orvibo, and Harmony with ZigBee Extender hubs. Zigbee plug in wall outlet enables remote control of floor/table lamps, fans, computers, or TVs from anywhere with any Wifi connected device
  • One ZigBee controlled outlet and one always-on AC outlet. Remotely turn ON/OFF appliance via smartphone or computer apps after added to a compatible ZigBee gateway. No wiring needed
  • Can be controlled in scenes or groups of multiple ZigBee devices for smarter control. Acts as a signal repeater to boost the network
  • Wireless ZigBee technology uses mesh networking to expand network reach and eliminate points of failure; built on 2.4GHz for worldwide use; uses a variety of security mechanisms such as AES-128 encryption, device and network keys, and frame counters
  • ZigBee frequency: 2.4GHz, HA 1.2 Certification; 120VAC; Incandescent: 1000W, Motor: 1/3 HP, Ballast: 1200VA, Resistive: 1800W(15A); FCC compliant. Device type code is required to work with SmartThings
  • Enerwave ZB-333 Z-Wave Wireless Plug-in Module allows you to remotely switch ON/OFF lights and small appliances such as the floor and table lamp, fan, computer, TV, speakers, and more from anywhere. With no wiring needed, you can easily upgrade your home to a smart home by adding this ZigBee outlet to your home automation system. The Enerwave ZB-333 ZigBee Plug has two outlets, one ZigBee enabled for appliances you want controlled via ZigBee, and another always-on AC outlet for other electrical appliances. If you forget to turn off the fan, speaker, TV or lights downstairs, just do it from your smartphone or computer! Through the ZigBee outlet switch, control appliances and group with other devices as part of a scene in your home automation network. Simultaneously control your fan downstairs with lights and other smart devices upstairs or in the Compatible only with SmartThings STH-ETH-200 or older, Orvibo, and Harmony with ZigBee Extender hubs. Zigbee plug in wall outlet enables remote control of floor/table lamps, fans, computers, or TVs from anywhere with any Wifi connected device; One ZigBee controlled outlet and one always-on AC outlet. Remotely turn ON/OFF appliance via smart
Close-up view of the Enerwave ZB-333-W ZigBee Module Plug-In Outlet for ZigBee Home Automation Smart Outlet Smart Switch Outlet Zig Bee Appliance
Details

Materials and care

material
‎Copper

Have a question about this product?

From the brand

Product detailProduct detailProduct detailProduct detailProduct detailProduct detail

Customer reviews

Customers say

Customer summary is not available yet.

★★★★★

Works great!

I'm using this with an Abode iota and it works just fine. Easy to set up. Just be sure to follow the instructions that come with the plug. They suggest excluding first, then including. I had no problems with the unit being recognized and controlled. Read more

Webfan
★★★★☆

Works great, but get the SmartThings device driver

Using this with SmartThings to control my Christmas tree, and it works great. However, I had to get the custom device driver before it would work. I didn't realize this was needed, so it was frustrating at first, but it was pretty easy to do. See the Question and Answer section here for the GitHub link for the device driver. The instructions in the FAQ link are detailed and if you just follow them step by step it is easy to do. Read more

Scott

Similar Products

Page 1 of 2

We use optional analytics and advertising cookies to understand how visitors use Ventari, measure ads, and improve the experience. You can accept all optional cookies, allow analytics only, or decline them. See our Cookie Policy.