Scale for Body Weight Digital Accurate Sleek Black and Durable for Home Use

About this item

• 1. Step-on technology: when the scale has weight above 10KG(22LB) on it, the 4 high accuracy sensors will work immediately, you needn't open it manually; auto power-on when sensors sense weight, and auto power-off 8 seconds later after it there's no weight on the scale
• 2. Two measurement units: LBS and KG. you can switch them freely by pressing the button on the back of the scale
• 3. Non-calibration before weighing: all our scales was calibrated twice before they're packed, you needn't calibrate weight again. as long as the scale is aclinic and on hard surface, just step on it, and value in the display screen is your real weight
• 4. Design with care: round edges and corners are safe when people use; tempered glass provides a sturdy platform to step on, sleek surface is easy to clean
• 5. Maximum weight is 180KG(397LB), minimum weight is 0.2KG(0.44LB). if weight is between it, we guarantee it's accurate; if beyond it, we suggest you use other scale
• 6. Please do install the lid of battery cabin well. if not, the scale will show wrong weight
• IMPORTANT MESSAGE YOU NEED TO KNOW BEFORE YOU WEIGH, PLEASE DO READ CAREFULLY !!! 1 . Please note: floor can't be carpet floor must be flat and hard surface, tile floor is the best ! wood floor and cement floor are ok. but, if the scale isn't accurate on them, please place it on tile floor and try again, because it's probably there's something wrong with wood floor and cement floor 2 . Only weigh after figure is zero a. step on the scale, and step off after light is on b. wait till figure is zero c. step on again, figure will flicer, wait till figure is stationary,figure at that time is your actual weight we ensure you'll get correct weight data as long as you do as the above. if you still don't think it correct, please do 1. Step-on technology: when the scale has weight above 10KG(22LB) on it, the 4 high accuracy sensors will work immediately, you needn't open it manually; auto power-on when sensors sense weight, and auto power-off 8 seconds later after it there's no weight on the scale; 2. Two measurement units: LBS and KG. you can switch them freely by pressing the button on the back of the scale; 3. Non-calibration before weighing: all our scales was calibrated twice before the